Making noseribs 
Sunday, August 31, 2008, 10:06 PM - Wings
Posted by Administrator
I cut out the eleven nose ribs today. They were roughed out from 1/4" birch plywood with a bandsaw then matched to my noserib template using a laminate trimmer router bit that has the bearing. These were all clamped together and stack sanded. While they were clamped, I also cut the notch in the nose for the leading edge moulding.

2 hours

[ add comment ] ( 3 views )   |  permalink  |   ( 2.5 / 53 )

<<First <Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next> Last>>